This single bay, three-tier steel racking kit is purpose-built for standard 20ft ISO container interiors, and also installs in 30ft and 40ft containers. Each kit covers a single 2250mm bay on one side wall. A standard 20ft container fits 2 bays per side, so covering both side walls fully requires 4 kits — pair this with our three-tier racking for rear of container if you also want to rack the end wall.
All steel components are powder-coated in blue and orange for a tough, scratch-resistant finish. Each 25mm chipboard shelf supports up to 550kg of evenly distributed load.
Racking Specifications
| Specification | Detail |
|---|---|
| Bay Width | 2250mm |
| End Frame Height | 2000mm (2m) |
| End Frame Width | 600mm |
| Shelf Tiers | 3 |
| Beams Per Shelf Level | 2 |
| Shelf Material | 25mm chipboard |
| Shelf Load Capacity | 550kg per shelf |
| Height Adjustment | 50mm increments |
| Steel Finish | Powder-coated — blue and orange |
| Beam Retention | Safety clips included on all beams |
| Kit Coverage | Single side wall — one 2250mm bay |
Container Compatibility — Kits Needed for Full Coverage
This racking suits standard ISO Series 1 freight containers, and multiple kits run side-by-side in longer containers to cover the full wall length.
| Container Size | Max Bays Per Side | Kits Required (Both Sides) |
|---|---|---|
| 20ft | 2 | 4 |
| 30ft | 3 | 6 |
| 40ft | 5 | 10 |
Note: This racking mounts on side walls only. The end wall requires our dedicated rear-of-container racking kit — this side-wall kit is not designed for end wall installation.
Key Features
- Two pre-assembled end frames — no cutting, welding, or drilling required
- Beams slot directly into end frame uprights for rapid assembly
- Safety clips lock all beams and prevent dislodgement under load
- Shelf heights adjust in 50mm increments to suit your stock profile
- Each shelf supports up to 550kg of evenly distributed weight
- All steel powder-coated in blue and orange — corrosion- and scratch-resistant
- 25mm chipboard shelf panels included per tier
- Compatible with 20ft, 30ft, and 40ft standard ISO containers
Assembly Overview
The end frames arrive pre-assembled, so on-site setup is fast with no specialist tools required.
Step 1 — Position the End Frames
Stand both end frames upright along the container side wall. Space them 2250mm apart.
Step 2 — Slot in the Beams
Slot two beams per tier into the corresponding height holes on each end frame, repeating for all three shelf levels.
Step 3 — Attach Safety Clips
Clip the safety clips onto each beam end, locking the beams so they cannot dislodge under load.
Step 4 — Lay the Chipboard Shelves
Place the 25mm chipboard panels onto each beam pair. The shelves sit flat and are ready to load immediately.
How Many Kits Do I Need?
This kit covers one 2250mm bay on one side wall. For a 20ft container, you need 4 kits total to fill both bay positions on both side walls — order fewer kits only if you’re covering a smaller section deliberately. For complete coverage including the end wall, add our rear-of-container racking kit.
Suitable For
- On-site tool rooms and parts stores in 20ft site containers
- Retail and wholesale overflow storage
- Construction site containers — keeps equipment and materials off the floor
- Agricultural storage — seeds, chemicals, and small equipment
- Workshop and garage containers
Browse our full range of container accessories and racking systems to complete your storage build.
