Container Solar Floodlight
This container solar floodlight mounts directly into any standard top corner casting and requires no wiring. Furthermore, the built-in PIR sensor activates the floodlight automatically on movement detection. Additionally, the tamper-proof post sits above ground level, making it impossible to disconnect or switch off from below.
Container Solar Floodlight Specifications
Electrical & Optical
| Spec | Value |
|---|---|
| LED Power | 8W |
| Luminous Output | 960 lm |
| Colour Temperature | 6500K — cool white |
| Solar Panel | Polycrystalline — built-in |
| Battery | 14.8WH Li-ion 3.7V 4AH |
| Run Time (Full Charge) | Up to 8 hours |
Physical Specifications
| Spec | Value |
|---|---|
| Product Dimensions | 350 mm x 150 mm x 35 mm |
| Housing Material | Plastic — IP65 rated |
| Post Finish | Powder coated — over-paintable |
| Sensor | PIR motion sensor — integrated |
| Mounting Point | Top corner casting — all standard containers |
| Installation Time | Minutes — no wiring required |
Why Fit a Container Solar Floodlight?
A container solar floodlight solves the most common problem with off-grid container storage — no power for lighting or security. As a result, the PIR sensor provides automatic activation at night without a mains connection. Moreover, the post clamps directly into the top corner casting, so no drilling or permanent modification is required. Therefore, it suits containers on farms, construction sites, remote rural properties, and unsecured commercial yards.
In addition, the tamper-proof mounting position above ground level prevents interference by would-be thieves. Furthermore, the polycrystalline solar panel charges the Li-ion battery throughout the day. This delivers up to 8 hours of continuous lighting after a full charge — sufficient for overnight security coverage.
Key Features
- No wiring required — solar charged, fully off-grid
- PIR motion sensor — automatic activation on movement
- Mounts to corner casting — fits all standard containers
- Tamper-proof from ground level — post height prevents interference
- Up to 8 hours runtime — full overnight coverage when fully charged
- 8W LED — 960 lm output — sufficient to illuminate the door area
- IP65 rated housing — weatherproof in Australian conditions
- Powder coated post — over-paintable to match container colour
- Quick installation — clamps and bolts supplied
Container Solar Floodlight — Installation Overview
The powder coated lamppost clamps into any of the four top corner castings. As a result, installation takes minutes with no tools beyond the supplied bolts. Moreover, the floodlight head positions and angles as required before locking in place. Therefore, it suits doors on any end or side of the container.
In addition, the post is powder coated as standard. Furthermore, it accepts over-painting in any colour to match the container finish. This keeps the installation visually consistent with the unit it protects.
Browse Container Accessories
Additionally, the container solar floodlight pairs well with lockboxes, ramps, and racking for a complete container setup. Browse our full range of container accessories to equip your unit for storage, security, and site access.
For container sizing and structural standards, refer to the ISO 668 Series 1 freight container standard. Therefore, all corner castings on ISO-rated containers accept this floodlight post directly.
Order This Container Solar Floodlight
In stock and available for immediate dispatch Australia-wide. Additionally, bulk pricing is available for multiple units. Reply with your order quantity and postcode to receive a delivered price.
